top of page

Zen Ed Group

Public·6 members
Ciprian Cristea
Ciprian Cristea

How to Install official Firmware QMobile S1 Pro - ROM-Provider[^3^]


How to Download and Install QMobile S1 Pro Software




Introduction




QMobile S1 Pro is a smartphone that runs on Android 6.0 Marshmallow operating system. It has a 5-inch display, a quad-core processor, 1 GB of RAM, 8 GB of internal storage, an 8 MP rear camera, and a 5 MP front camera. It also supports dual SIM cards, Wi-Fi, Bluetooth, GPS, and 3G connectivity.




qmobile s1 pro software download



If you own a QMobile S1 Pro and you want to update its software or fix some issues, you may need to download and install the official firmware for your device. Firmware is the software that controls the hardware and functions of your phone. By installing the latest firmware, you can improve the performance, stability, security, and features of your phone.


In this article, we will show you how to download and install QMobile S1 Pro software using a computer and a USB cable. We will also provide you with the links to the firmware files, the USB driver, the flash tool, and the instruction manual. Follow the steps carefully and make sure you backup your data before proceeding.


What You Need




  • A QMobile S1 Pro smartphone with at least 50% battery charge.



  • A computer running Windows XP or higher.



  • A USB cable compatible with your phone.



  • The firmware file for QMobile S1 Pro (QMobile_S1_Pro_6.0_ALPS_MP_M0.MP1_V2.34_MT6580.zip).



  • The USB driver for QMobile S1 Pro (MTK_USB_All_v1.0.8.zip).



  • The flash tool for QMobile S1 Pro (SP_Flash_Tool_v5.1824_Win.zip).



  • The instruction manual for QMobile S1 Pro (QMobile_S1_Pro_Firmware_Installation_Guide.pdf).



Where to Download




You can download the firmware file, the USB driver, the flash tool, and the instruction manual from the following links:


File NameFile SizeDownload Link


Firmware file1 GB[Download link part 1][Download link part 2][Download link part 3][Download link part 4]


USB driver23 MB[Download link](


Flash tool54 MB[Download link](


Instruction manual2 MB[Download link](


After downloading the files, extract them to a folder on your computer using a file extractor program like WinRAR or 7-Zip.


qmobile s1 pro firmware flash file


qmobile s1 pro official stock rom


qmobile s1 pro usb driver for windows


qmobile s1 pro android 6.0 marshmallow update


qmobile s1 pro hard reset and unlock pattern


qmobile s1 pro custom recovery and root


qmobile s1 pro backup and restore guide


qmobile s1 pro troubleshooting and repair tips


qmobile s1 pro specifications and features


qmobile s1 pro price and availability in pakistan


qmobile s1 pro user reviews and ratings


qmobile s1 pro comparison and benchmark


qmobile s1 pro camera and battery performance


qmobile s1 pro software issues and solutions


qmobile s1 pro latest news and updates


qmobile s1 pro flash tool download free


qmobile s1 pro how to install firmware step by step


qmobile s1 pro best custom roms and mods


qmobile s1 pro compatible accessories and cases


qmobile s1 pro sim network unlock code


qmobile s1 pro frp bypass and google account remove


qmobile s1 pro imei repair and change guide


qmobile s1 pro hidden codes and secret menus


qmobile s1 pro tips and tricks to improve performance


qmobile s1 pro android 7.0 nougat update possibility


qmobile s1 pro stock wallpapers and ringtones download


qmobile s1 pro how to root without pc


qmobile s1 pro unbrick and fix bootloop guide


qmobile s1 pro vs other budget smartphones comparison


qmobile s1 pro software update download link [^3^]


qmobile s1 pro original firmware download link [^3^]


qmobile s1 pro official usb driver download link [^2^]


qmobile s1 pro how to flash firmware using sp flash tool [^3^]


qmobile s1 pro mt6580 chipset details and features [^3^]


qmobile s1 pro android 6.0 alps mp m0 mp1 v2.34 firmware [^3^]


qmobile s1 pro how to backup stock rom before flashing [^3^]


qmobile s1 pro how to enable usb debugging mode [^3^]


qmobile s1 pro how to wipe cache partition and factory reset [^3^]


qmobile s1 pro how to install twrp recovery and root [^3^]


qmobile s1 pro how to fix common software problems [^3^]


qmobile s1 pro how to increase internal storage space [^3^]


qmobile s1 pro how to remove bloatware and unwanted apps [^3^]


qmobile s1 pro how to improve battery life and optimize settings [^3^]


qmobile s1 pro how to use split screen and multi window mode [^3^]


qmobile s1 pro how to customize ui and launcher [^3^]


qmobile s1 pro how to use gesture controls and smart features [^3^]


qmobile s1 pro how to record screen and take screenshots [^3^]


qmobile s1 pro how to use dual sim and sd card slot [^3^]


qmobile s1 pro how to use 4g volte and wifi hotspot [^3^]


qmobile s1 pro how to use 8mp rear camera and 5mp front camera [^3^]


How to Install




  • Install the USB driver on your computer by running the MTK_USB_All_v1.0.8.exe file and following the on-screen instructions.



  • Turn off your phone and remove the battery (if removable).



  • Open the SP Flash Tool folder and run the flash_tool.exe file as administrator.



  • Click on the Scatter-loading button and browse to the firmware folder. Select the MT6580_Android_scatter.txt file and click Open.



  • Make sure all the boxes are checked and click on Download.



  • Connect your phone to your computer via USB cable without inserting the battery.



  • The flash tool will detect your phone and start flashing the firmware. Wait for the process to complete. You will see a green circle with a check mark when it is done.



  • Disconnect your phone from your computer and insert the battery. Turn on your phone and wait for it to boot up.



  • Congratulations! You have successfully installed QMobile S1 Pro software on your phone.



Troubleshooting




If you encounter any problems during or after installing the firmware installation, here are some possible solutions:


  • If the flash tool does not detect your phone, try using a different USB port or cable, or reinstall the USB driver.



  • If the flash tool shows an error message, try changing the download mode to Firmware Upgrade or Format All + Download.



  • If your phone does not boot up or gets stuck in a boot loop, try performing a factory reset by holding the power and volume up buttons together until you see the recovery menu. Select wipe data/factory reset and confirm. Then reboot your phone.



  • If your phone shows a white screen or no display, try flashing the firmware again with a different version of the flash tool.



  • If your phone has any other issues, contact QMobile customer support or visit a nearby service center for assistance.



Conclusion




QMobile S1 Pro is a budget-friendly smartphone that offers decent features and performance. However, it may sometimes need a software update or repair to fix some bugs or improve its functionality. In this article, we have shown you how to download and install QMobile S1 Pro software using a computer and a USB cable. We have also provided you with the links to the firmware file, the USB driver, the flash tool, and the instruction manual. We hope this guide was helpful and easy to follow. If you have any questions or feedback, please let us know in the comments section below.


FAQs




Q: How can I check the software version of my QMobile S1 Pro?




A: You can check the software version of your QMobile S1 Pro by going to Settings > About phone > Software information. You will see the Android version, kernel version, build number, and custom build version of your phone.


Q: How can I backup my data before installing QMobile S1 Pro software?




A: You can backup your data before installing QMobile S1 Pro software by using a backup app like Google Drive, Dropbox, or Titanium Backup. You can also copy your files to your computer or an external storage device using a USB cable.


Q: How can I root my QMobile S1 Pro after installing QMobile S1 Pro software?




A: You can root your QMobile S1 Pro after installing QMobile S1 Pro software by using a root app like KingoRoot, iRoot, or Framaroot. You can also use a custom recovery like TWRP or CWM to flash a SuperSU zip file. However, rooting your phone may void your warranty and expose it to security risks. Proceed at your own risk and responsibility.


Q: How can I install custom ROMs on my QMobile S1 Pro after installing QMobile S1 Pro software?




A: You can install custom ROMs on your QMobile S1 Pro after installing QMobile S1 Pro software by using a custom recovery like TWRP or CWM to flash the ROM zip file. You may also need to flash a compatible GApps zip file to get Google services and apps. However, installing custom ROMs may cause compatibility issues and instability on your phone. Make sure you download the ROM from a trusted source and follow the instructions carefully.


Q: How can I unbrick my QMobile S1 Pro if it gets bricked during or after installing QMobile S1 Pro software?




A: You can unbrick your QMobile S1 Pro if it gets bricked during or after installing QMobile S1 Pro software by flashing the stock firmware again using the SP Flash Tool. You may also need to format your phone before flashing the firmware. If that does not work, you may need to use a professional tool like Miracle Box or NCK Box to repair your phone.


About

Welcome to the group! You can connect with other members, ge...

Members

  • Sarah Dimick
    Sarah Dimick
  • Warner Kale
    Warner Kale
  • hania amir
    hania amir
  • Miller Torbert
    Miller Torbert
  • Ciprian Cristea
    Ciprian Cristea
bottom of page